Register the authenticator

  1. On your PC, select Start > YubiOn > FIDO Logon Configuration Tool to launch the YubiOn FIDO Logon Settings Tool.
    Settings Tool

  2. Select “Authentication Settings” from the left menu of the Settings Tool.
    Settings Tool

  3. Click on the “Register” button.

  4. Connect the authenticator to your PC. Connect the authenticator

  5. Operate the authenticator. Connect the authenticator

The operation of the authenticator varies depending on the device you are using.
・If the PIN is not registered in the device
Touch the device.
・Device with PIN set
Enter the PIN.
Touch the device.
・For devices with fingerprint enrollment
Touch the device to read the fingerprint.

  1. Registration is complete. Registration is complete.

  2. Confirm that the registered authenticator is displayed in the list screen.

  3. Exit the Settings tool.